Click to enlargeNW16 CNC Machined Clamp
Fits: 0.50" or 0.75" Tube OD 
Aluminum

NW16-075-C
Standard CNC Machine Clamp (Aluminum)
Fits: NW16, NW10 (KF16, KF10)
Fits: 0.50" or 0.75" Tube OD

• High Vacuum Clamp
• Uses Standard NW (KF) seal assembly
• A: 1.94"
• B: 0.63"
• 1/4-20 Thread Size
• MAX PSI: 300

Fits Both NW10 & NW16 Series Flanges
(KF10 & KF16)


NW10 Flange OD: Ø1.18"
• NW10 Tube OD: 0.50" (Typical)
• NW10 Centering Ring Counter Bore: 0.48"

NW10 High Vacuum Flange Equivalents
KF10, KF-10, K050, NW-10, QF10, ISO-QF, Klamp


NW16 Flange OD: Ø1.18"
• NW16 Tube OD: 0.75" (Typical)
• NW16 Centering Ring Counter Bore: 0.68"

NW16 High Vacuum Flange Equivalents
KF16, KF-16, K075, NW-16, QF16, ISO-QF
NW16-075-C Compare to: QF16-075-MC QF10/16-C 4050000 QF16-075-C KF-CC-1016-AL NW16-075-C-PK10 NW16-C-PK10 NW10-050-C NW10-C-PK10


CNC Machined Clamp
Fits: NW10 & NW16
(NW16-075-C)

NW16-075-CPrice: $22.30Sale: $19.00

Click to enlarge
Click to enlarge
Order 10 Pack


NW10 & NW16 Clamps (All Types)


Click to enlarge
Click to enlarge
All NW10 Hardware


All NW16 Hardware


Click to enlarge
Click to enlarge
NW10 Centering Rings


NW16 Centering Rings


Click to enlarge
Adaptive Centering Rings
(NW16 to NW10)




CNC Machine Clamp
• 6016 T6 Aluminum High Vacuum Clamp
• NW, KF, QF Series Clamps

• SS pins and stud
• Integral handle lock helps prevent accidental opening
• Aluminum bar machined for extra strength and durability

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.