| ![](https://sep.turbifycdn.com/ca/Img/trans_1x1.gif) | ![](https://s.turbifycdn.com/aah/vacuumshopper/feedthroughs-15.gif)
![Click to enlarge](https://s.turbifycdn.com/aah/vacuumshopper/nw50-clamp-ring-assembly-35.gif)
![NW50 Clamp & Ring Assembly](https://s.turbifycdn.com/aah/vacuumshopper/nw50-clamp-ring-assembly-nw50-cw-srv-16.gif)
NW50-CW-SRV
NW50 Centering Ring and Wing Clamp Assembly
• Fits NW50, KF50 & QF50 Series Flanges & Fittings
• NW50 (KF50) High Vacuum Hardware
• Images Shown May Be For Reference Only
NW50 Flange OD: Ø2.95"
• NW50 Centering Ring Counter Bore: 2.06"
NW50 High Vacuum Flange Equivalents
KF50, KF-50, K200, NW-50, QF50, ISO-QF
NW50-CW-SR-V NW50-SRV-CW Klamp
NW50-CW-SRV Includes:
NW50 Aluminum Wing Clamp (NW50-200-CW)
NW50 Stainless/Viton Centering Ring (NW50-200-SR-V)
|
Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com
LDS Vacuum Products is a 100% woman owned company and certified Woman Owned Small Business (WOSB) The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers |
|