|
|  | 
 
nXDS20i
DRY Scroll Pump, 13.0 CFM
• NW25 Inlet/Exhaust
• NW25 (KF25) Flange OD: Ø1.57"
• 110/240V 50/60Hz 1-Ø
• 58 lbs.
• Cooling Method: Air Cooling (forced - fan)
• Edwards Vacuum Part Number: A73801983
Classification Product Pressure Range:
• Medium Vacuum: 1 mbar - 1¡P10⁻³ mbar
• Rough Vacuum: 1000 mbar - 1 mbar
Dry scroll vacuum pumps are positive displacement pumps that use two spiral-shaped scrolls, one fixed and one orbiting, to trap and compress gas molecules. They are oil-free, low maintenance pumps that are commonly used for clean vacuum applications. Since they do not rely on oil for sealing and lubrication, they eliminate the risk of oil contamination and leakage, making them an environmentally-friendly choice.
|
|
nXDS20i |
| Nominal Rotational Speed |
1800 rpm |
| Displacement |
28.0 / 16.5 (m3h-1 / ft3min-1)
|
| Peak Pumping Speed |
22.0 / 13.0 (m3h-1 / ft3min-1)
|
| Ultimate Vacuum (Total Pressure) |
0.030 / 0.022 (mbar / Torr) |
| Minimum Standby Rotational Speed |
1200 rpm |
Speed Control Resoultion
(Percentage of Full Rotational Speed)
|
1% |
Pumping Speed at Minimum Rotational
Speed |
10 |
| Maximum Continuous Inlet Pressure |
50 mbar |
| Motor Power 1-ph |
260 W |
| Power Connector 1-ph |
IEC EN60320 C13 |
| Recommended Fuse |
10A, 250Vac rms |
| Weight |
25.6 / 56 (kg / lb) |
| Inlet Flange |
NW25 (KF25) |
| Exhaust Flange |
NW25 (KF25) |
| Noise Level |
52 dB(A) |
| Vibration at Inlet Flange |
< 4.5 mms
-1 (rms)
|
| Leak Tightness (Static) |
< 1x10
-6 mbar ls
-1
|
| Operating Temperature Range |
10 to 40 ¢XC / 41 to 104 ¢XF |
Free Shipping Does NOT Apply To Edwards Pumps
Contact LDS Vacuum with any questions:
Phone (407) 862-4643 via Fax (407) 862-8723 or info@ldsvacuum.com
LDS Vacuum Products is a 100% woman owned company.
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products. |
|
