Model E2M0.7
Edwards Mechanical Pump 
0.5 CFM
200/230V 50/60 Hz, Single Phase
Inlet NW10 Flange 
Outlet - Nozzle 11 mm external diameter

EDW-A37141919
E2M0.7 Rotary Vane Mechanical Pump
0.5 CFM

• NW10 (KF10) Flange Inlet
• 11mm nozzle Fitted To 3/8" BSP threaded hole Outlet
• 22 lbs.
A37141919 37141919


Model E2M0.7
EDW-A37141919$2,275.00

E2M0.7 Series Rotary Vane Mechanical Pumps

Displacement (swept volume) 50 Hz

0.9 m3h-1 / 0.5 ft3min-1

Displacement (swept volume) 60 Hz

1.1 m3h-1 / 0.6 ft3min-1

Speed (Pneurop 6602) 50 Hz

0.75 m3h-1 / 0.4 ft3min-1

Speed (Pneurop 6602) 60Hz

0.95 m3h-1 / 0.5 ft3min-1

Ultimate vacuum (total pressure)

without gas ballast

3.0 x 10-3 mbar / 2.3 x 10-3 Torr

with full gas ballast

2.0 x 10-1 mbar / 1.5 x 10-1 Torr

Inlet connection

NW10 flange

Outlet connection

Nozzle 11 mm external diameter removable from 3/8 BSP tapped hole

Maximum permitted pressure at outlet

0.5 bar gauge / 7 psig

Maximum inlet pressure for water vapour

15 mbar / 11 Torr

Maximum water vapour pumping rate

8 gh-1

Motor power

0.09 kW

Nominal rotational speed 50/60Hz

1400/1700 rpm

Power connector

IEC EN60320 C13

Operating temperature range

12 - 40 C

Weight, without oil

10 kg / 22 lbs

Noise

43 dB(A) @ 50 Hz

Noise with acoustic enclosure

36 dB(A) @ 50 Hz

Oil capacity - maximum

0.28 litre

Oil capacity - minimum

0.2 litre

Recommended oil (supplied)

Ultragrade 15

Free Shipping Does NOT Apply To Edwards Pumps

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.