6.00" OD Conflat to NW50 <br> Conical Reducer <br> (600xNW50-CR)

6.00" OD Conflat to NW50
Conical Reducer
A: 2.95
B: 6.00"
C: 4.21"

600xNW50-CR
NW50 (KF50) to 6.00" OD Conflat Flange (CF)
• Conical Reducing Nipple
• Flange to Flange Conical Reducer
• High Vacuum Adapter
• OD Polish

NW50 (KF50) Flange OD: Ø2.95"
• NW50x600-CR, NW50xDN100CF, KF50xDN100CF
• NW50 Tube OD: 2"
• NW50 Centering Ring Counter Bore: 2.06"

NW50 High Vacuum Flange Equivalents
KF50, KF-50, K200, NW-50, QF50, ISO-QF

6.00" OD Conflat Flange (CF):
• DN100CFxNW50, DN100CFxKF50
• Non-Rotatable
• 4" Tube OD
• 16-Clearance (Thru) Holes
• 0.332" Bolt Hole Diameter

6" OD Conflat (600CFF) Equivalents
• CF100, CF600, DN100CF, NW100CF, 600CF
600xNW40-CR Compare to: P103976 ANC-NW-50-600 5000703 600XQF50-CR CF600XQF50-400X200-CR-4.21 NW50x600-CR-VE 600xNW50-CR-VE



6.00" OD Conflat Series Hardware		All NW50 Hardware



NW to Conflat Adapters (ALL)		Make Your Own!

***NW50 Flange Accessories Available Below***
NW50 Centering Rings
NW50 Clamps, All Types
NW50 Plastic Caps

**6.00" OD Conflat Flange Accessories Below**
6.00" OD Conflat Flange - Bolt Kits
6.00" OD Conflat Flange - Copper Gaskets
6.00" OD Conflat Flange - Viton Gaskets
6.00" OD Conflat Flange – Plastic Caps
Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers