Click to enlarge600 Conflat Flange Series
(5) Viton® Gaskets
For Use With 6.00" OD Conflat Flange
4.51" ID Gasket
Torque Max: 7-10 ft-lb

Part Number: 600-VG-5
• (5) Viton Gaskets
Fits ALL 6.00" OD Conflat Flanges (600 CF)

6" Conflat Flange Viton Gaskets
6.00" OD Conflat Flange Viton Gasket
Fluorocarbon, FKM, Viton Gaskets
Fits 6.00" OD Conflat Flanges Only (CF 600)

• Reusable
• High Vacuum Rating: 1x10-8 torr (approx)
• Temperature Range: -70°C up to 50°C
• Intermittent use to 200°C
• Torque Max: 7-10 ft-lb

6" OD Conflat Flange (CF) Equivalents:
• CF100, CF600, DN100CF, NW100CF, 600CF
Compare to: 100889026 GA-0600V

600 Conflat Flange Series Viton Gaskets

600-VG-5Price: $227.70Sale: $69.00

Click to enlarge6.00" OD Conflat Series Hardware

Viton® (Fluorocarbon, FKM) Gaskets may require slight stretching to fit in the Conflat Flange CF groove. Also, it is recommended to use a small amount of vacuum grease to help keep the O'Ring in place.

Operating at a pressure below 10-8?
Viton O Ring sealed compression ports limit the system pressure because of leakage and permeation.
In this case, use CF Copper Gaskets instead!

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers