Click to enlarge(1) Viton® Gasket For Use With 14.00" OD Conflat Flange Torque Max: 7-10 ft-lb

Part Number: 1400-VG
• (1) Viton Gasket
Fits ALL 14.00" OD Conflat Flanges (1400 CF)

14.00" OD Conflat Flange Viton Gasket
Fluorocarbon, FKM, Viton Gaskets
Fits 14" OD Conflat Flanges Only (CF 1400)
• Reusable
• High Vacuum Rating: 1x10-8 torr (approx)
• Temperature Range: -70°C up to 50°C
• Intermittent use to 200°C
• Torque Max: 7-10 ft-lb

14.00" OD Conflat Equivalents:
• CF1400, DN295CF, DN300CF, CF300, 1400CF

Viton (Fluorocarbon, FKM) Gaskets may require slight stretching to fit in the Conflat Flange CF groove. Also, it is recommended to use a small amount of vacuum grease to help keep the O'Ring in place.

Operating at a pressure below 10-8?
Viton O Ring sealed compression ports limit the system pressure because of leakage and permeation.
In this case, use CF Copper Gaskets instead!
1400-VG Compare to: GA-1400V 0604012 FG1400VU


1400 Conflat Flange Series Viton Gasket
(1400-VG)
1400-VG$93.00

Click to enlargeShop all 14.00" OD Conflat Hardware

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Images Shown May Be For Reference Only

There is a global helium shortage. Each time an MRI is performed, helium is used. Please rethink your helium balloon purchase.