Click to enlarge

Fits 1.33" OD Conflat Flange
0.62" ID
Pack of (5) Viton® gaskets

133-VG
1.33" OD Conflat Flange Viton Gasket
Fluorocarbon, FKM, Viton Gaskets

• Fits 1.33" OD Conflat Flanges Only (CF 133)
• 0.62" ID Gasket
• Reusable
• High Vacuum Rating: 1x10-8 torr (approx)
• Temperature Range: -70°C up to 50°C
• Intermittent use to 200°C
• Torque Max: 7-10 ft-lb
• Pack of 5

1.33" OD CF Conflat Flange Equivalents
• CF133, DN16CF, NW16CF, CF16, 133CF,
1-1/3" Mini Conflat, CFF
Compare to: 100889020


133 Conflat Flange Series Viton Gaskets
(133-VG)

133-VGPrice: $40.50Sale: $16.00

Click to enlargeShop all 1.33" OD Conflat Hardware

Viton® (Fluorocarbon, FKM) Gaskets may require slight stretching to fit in the Conflat Flange CF groove. Also, it is recommended to use a small amount of vacuum grease to help keep the O'Ring in place.

Operating at a pressure below 10-8?
Viton O Ring sealed compression ports limit the system pressure because of leakage and permeation.
In this case, use CF Copper Gaskets instead!

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers